StiForm Methods

Increases the amount of pages on width and on height. Herewith on width or height of the page change all sizes a parent component.

Aligns, in the rectangle of selected objects, all selected objects.

Aligns to grid all selected components in the container.

Divides content of components in two parts. Returns result of dividing. If true, then component is successful divided.

Brings to front objects of the list in the container.

Specifies that this component may be located in the specified component.

Changes the position of the selected component.

Clear all earlier saved object states.

Clears a text of all selected components.

Creates a new object that is a copy of the current instance.

Creates a new object that is a copy of the current instance.

Closes the form.

Converts a value from the parent-container coordinates into coordinates of a page. The method calls the ContainerToPage method of the parent component.

Converts a point from the parent-container coordinates into coordinates of a page. The method calls the ContainerToPage method of the parent component.

Converts a rectangle from the parent-container coordinates into coordinates of a page. The method calls the ContainerToPage method of the parent component.

Converts a point of coordinates of the container into coodinates of a page.

Converts a rectangle from container coordinates into coordinates of a page.

Converts a component out of one unit into another.

Converts coordinates of all objects into coordinates of a page.

Converts objects from all coordinates into coordinates of a page without move them on a page.

Corrects in the container all objects which require motion between containers.

Corrects in container all objects which require moving.

Deserilizes object from XmlTextReader.

Runs the designer for one page.

Runs the designer for one page with using WPF technology.

Invokes the GetBookmark event.

Docks the component and all of its subordinate components.

Docks a rectangle, relatively to the component, into the rectangle.

Determines whether the specified object is equal to the current object.

Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.

Returns a frame of the object of the type IStiBorder being met first. Scans all selected objects in the container.

Returns a brush of an object of the type StiBrush being met first. Scans all selected objects in the container.

Returns an object in which zone of controlling coordinates are got.

Returns an object in which zone of controlling coordinates are got.

Returns an object in which zone of controlling coordinates are got.

Returns an object in which zone of controlling coordinates are got.

Returns the list of all components which are located in the container.

Returns the list of all components which are located in the container.

Returns the list of all components which are located in the container.

Returns conditions of an object of the type. Scans all selected objects in the container.

Returns the topmost Container(StiPanel or StiPage) in which the component is located. Returns null, if nothing is located.

Returns an container in which client zone coordinates are got.

Returns the DataBand in which the component is located. Returns null, if nothing is located.

Gets default event for this report control.

Returns a rectangle of the component showing.

Returns the first docked and selected component.

Retuns an empty rectangle to which docking is possible.

Retuns an empty rectangle to which docking is possible.

Returns the style of docking of the component being met first. Scans all selected objects in the container.

Return events collection of this component;

Returns the first selected component.

Returns a font of an object of the type IStiFont being met first. Scans all selected objects in the container.

Returns the GroupHeaderBand in which the component is located. Returns null, if nothing is located.

Serves as the default hash function.

Returns a horizontal alignment of the object of the type IStiHorAlignment being met first. Scans all selected objects in the container.

Returns the list of all objects which require motion between containers.

Returns the list of all objects which require motion between containers.

Returns the level of the object nesting. Level 1 - page, 2 - page and etc.

Returns linked of the object being met first. Scans all selected objects in the container.

Returns lock of the object being met first. Scans all selected objects in the container.

Returns maximum sizes among selected objects.

Makes all necessary coversions for showing an object and returns its coordinates.

Makes all necessary conversions for the object output and returns its coordinates.

Makes all necessary conversions for the object output and returns its coordinates.

Returns bounds of printing of the printer.

The rectangle includes all selected objects in the container. The rectangle is represented in page coordinates.

Returns the array of the selected components.

Returns the array of the selected components.

Returns the array of the selected objects including child of the selected objects.

Returns the rectangle that includes all selected objects in the container. The rectangle is represented in page coordinates.

The rectangle includes all selected objects in the container and children containers which are located in the selected containers. The rectangle is represented in page coordinates.

Returns a brush of an object of the type IStiTextBrush being met first. Scans all selected objects in the container.

Returns a format of an object of the type IStiText being met first. Scans all selected objects in the container.

Returns a horizontal alignment of an object of the type IStiTextHorAlignment being met first. Scans all selected objects in the container.

Gets a thumbnail image of the component.

Gets a thumbnail image of the component.

Gets a thumbnail image of the component.

Gets a thumbnail image in the byte aray of the component.

Gets the Type of the current instance.

Returns a vertical alignment of the object of the type IStiVertAlignment being met first. Scans all selected objects in the container.

Renders a component in the specified container without generation of the 'BeforePrintEvent' event and the 'AfterPrintEvent' event and without checking Conditions. The rendered component will return in 'renderedComponent' argument.

Invert selection of component.

Raises the AfterPrint event.

Raises the BeforePrint event.

Raises the BeginRender event for this component.

Raises the Click event for this report.

Raises the ColumnBeginRender event for this component.

Raises the ColumnBeginRender event for this component.

Raises the ColumnEndRender event for this component.

Raises the ColumnBeginRender event for this component.

Raises the DoubleClick event for this report.

Raises the EndRender event for this component.

Invokes all events for this components.

Raises the GetBookmark event.

Raises the GetDrillDownReport event for this report.

Raises the GetExcelSheet event.

Raises the GetHyperlink event.

Raises the GetTag event.

Raises the GetToolTip event.

Raises the MouseEnter event for this report.

Raises the MouseLeave event for this report.

Raises the Painted event for this component.

Raises the Painting event for this component.

Raises the Rendering event for this component.

Loads a page template into the stream in the format XML.

Loads a page template from the stream in the format XML.

Loads a page template from the stream using the provider.

Loads a page template from the file using the provider.

Loads a rendered page from the stream in the XML format.

Loads a rendered page from the stream in the XML format.

Loads a rendered page from the stream using the provider.

Loads a rendered page from the file using the provider.

Loads a rendered page from the packed stream in the XML format.

Puts components which are equivalent to their width.

Sets the height to all selected objects.

Sets the size to all selected objects.

Sets the width to all selected objects.

Puts components which are equal in their height.

Creates a shallow copy of the current Object.

Moves backward objects of the list in the container.

Converts coordinates of all objects into coordinates of a page and moves objects on the page.

Moves forward objects of the list in the container.

Normalizes all selected objects in the container.

Raises the AfterPrint event.

Raises the BeforePrint event.

Raises the BeginRender event for this component.

Raises the Click event for this report.

Raises the ColumnBeginRender event for this component.

Raises the ColumnEndRender event for this component.

Raises the DoubleClick event for this report.

Raises the EndRender event for this component.

Raises the GetBookmark event.

Raises the GetDrillDownReport event for this report.

Raises the GetExcelSheet event.

Raises the GetHyperlink event.

Raises the GetTag event.

Raises the GetToolTip event.

Raises the MouseEnter event for this report.

Raises the MouseLeave event for this report.

Raises the Painted event for this component.

Raises the Painting event for this component.

Raises the Rendering event for this component.

Packs a service.

Converts a point from coordinates of a page into the parent-container coordinates. The method calls the PageToContainer method of the parent component.

Converts a rectangle from coordinates of a page into the parent-container coordinates. The method calls the PageToContainer method of the parent component.

Converts a point of coordinates of a page into coodinates of a container.

Converts a rectangle from coordinates of a page into container coordinates.

Paints a page.

Paints a component.

Paints events of a component.

Paints the highlight of the component.

Paints a markers specified by a Rectangle structure. This method can be used only in win version.

Paints the selection of the component.

Specifies whether it is possible to place the component on the ColumnBand.

Prepare content for rendering.

Removes all selected object from the container.

Removes all selected object from the container.

Renders a component in the specified container with events generation.

Renders a component in the specified container with events generation. The rendered component will return in 'renderedComponent' argument.

Renders a component in the specified container without generation of the 'BeforePrintEvent' event and the 'AfterPrintEvent' event and without checking Conditions. The rendered component will return in 'renderedComponent' argument. This is backward compatibility method. Please use InternalRender method for new developed components.

Rendering a container without invokes events.

Reset selection of component.

Resets selection from all selected objects in the container.

Restores the earlier saved object state.

Saves a page template into the stream in the format XML.

Saves a page template in the file in the format XML.

Saves a page template into the stream using the provider.

Saves a page template into the file using the provider.

Saves a rendered page into the stream in the XML format.

Saves a rendered page in the file in the XML format.

Saves a rendered page into the stream using the specified provider.

Saves a rendered page into the file using the provider.

Saves a rendered page into the packed stream in the XML format.

Saves the current state of an object.

Select component.

Select all components in container.

Selects the specified component in the container.

Selects all objects in the container which intersect with the specified rectangle.

Sends to back objects of the list in the container.

Serializes object into XmlTextWriter.

Sets StiBorder from all selected objects in the container. Sets Side, DropShadow, Color, Style. All other elements are ignored.

Sets IStiBrush from all selected objects in the container.

Centers horizontally all selected objects.

Centers vertically all selected objects.

Sets conditions to all selected objects in the container.

Sets Dock from all selected objects in the container.

Sets IStiFont from all selected objects in the container.

Sets StiHorAlignment from all selected objects in the container.

Sets Link from all selected objects in the container.

Sets Lock from all selected objects in the container.

Internal use only.

Sets IStiTextBrush from all selected objects in the container.

Sets StiFormatService from all selected objects in the container.

Sets StiTextHorAlignment from all selected objects in the container.

Sets StiVertAlignment from all selected objects in the container.

Returns an Name of the component and/or the Alias of the component.

Clear component afrer render.

Use for update report control properties.