State of a lexer, parser, or tree parser are collected into a this.state object so the this.state can be shared. This sharing is needed to have one grammar import others and share same error variables and other this.state variables. It's a kind of explicit multiple inheritance via delegation of methods and shared this.state.
Used to print out token names like ID during debugging and error reporting. The generated parsers implement a method that overrides this to point to their String[] tokenNames.
Return whether or not a backtracking attempt failed.
Get number of recognition errors (lexer, parser, tree parser). Each recognizer tracks its own number. So parser and lexer each have separate count. Does not count the spurious errors found between an error and next valid token match
Has this rule already parsed input at the current index in the input stream? Return the stop token index or MEMO_RULE_UNKNOWN. If we attempted but failed to parse properly before, return MEMO_RULE_FAILED.
This method has a side-effect: if we have seen this input for this rule and successfully parsed before, then seek ahead to 1 past the stop token matched for this rule last time.
A hook to listen in on the token consumption during error recovery. The DebugParser subclasses this to fire events to the listenter.
what is exact? it seems to only add sets from above on stack if EOR is in set i. When it sees a set w/o EOR, it stops adding. Why would we ever want them all? Maybe no viable alt instead of mismatched token?
Compute the context-sensitive FOLLOW set for current rule. This is set of token types that can follow a specific rule reference given a specific call chain. You get the set of viable tokens that can possibly come next (lookahead depth 1) given the current call chain. Contrast this with the definition of plain FOLLOW for rule r:
FOLLOW(r)={x | S=>*alpha r beta in G and x in FIRST(beta)}
where x in T* and alpha, beta in V*; T is set of terminals and V is the set of terminals and nonterminals. In other words, FOLLOW(r) is the set of all tokens that can possibly follow references to r in any sentential form (context). At runtime, however, we know precisely which context applies as we have the call chain. We may compute the exact (rather than covering superset) set of following tokens.
For example, consider grammar:
stat : ID '=' expr ';' // FOLLOW(stat)=={EOF} | "return" expr '.' ; expr : atom ('+' atom)* ; // FOLLOW(expr)=={';','.',')'} atom : INT // FOLLOW(atom)=={'+',')',';','.'} | '(' expr ')' ;
The FOLLOW sets are all inclusive whereas context-sensitive FOLLOW sets are precisely what could follow a rule reference. For input input "i=(3);", here is the derivation:
stat => ID '=' expr ';' => ID '=' atom ('+' atom)* ';' => ID '=' '(' expr ')' ('+' atom)* ';' => ID '=' '(' atom ')' ('+' atom)* ';' => ID '=' '(' INT ')' ('+' atom)* ';' => ID '=' '(' INT ')' ';'
At the "3" token, you'd have a call chain of
stat -> expr -> atom -> expr -> atom
What can follow that specific nested ref to atom? Exactly ')' as you can see by looking at the derivation of this specific input. Contrast this with the FOLLOW(atom)={'+',')',';','.'}.
You want the exact viable token set when recovering from a token mismatch. Upon token mismatch, if LA(1) is member of the viable next token set, then you know there is most likely a missing token in the input stream. "Insert" one by just not throwing an exception.
Compute the error recovery set for the current rule. During rule invocation, the parser pushes the set of tokens that can follow that rule reference on the stack; this amounts to computing FIRST of what follows the rule reference in the enclosing rule. This local follow set only includes tokens from within the rule; i.e., the FIRST computation done by ANTLR stops at the end of a rule.
EXAMPLE
When you find a "no viable alt exception", the input is not consistent with any of the alternatives for rule r. The best thing to do is to consume tokens until you see something that can legally follow a call to r or any rule that called r. You don't want the exact set of viable next tokens because the input might just be missing a token--you might consume the rest of the input looking for one of the missing tokens.
Consider grammar:
a : '[' b ']' | '(' b ')' ; b : c '^' INT ; c : ID | INT ;
At each rule invocation, the set of tokens that could follow that rule is pushed on a stack. Here are the various "local" follow sets:
FOLLOW(b1_in_a) = FIRST(']') = ']' FOLLOW(b2_in_a) = FIRST(')') = ')' FOLLOW(c_in_b) = FIRST('^') = '^'
Upon erroneous input "[]", the call chain is
a -> b -> c
and, hence, the follow context stack is:
depth local follow set after call to rule
0
Notice that ')' is not included, because b would have to have been called from a different context in rule a for ')' to be included.
For error recovery, we cannot consider FOLLOW(c) (context-sensitive or otherwise). We need the combined set of all context-sensitive FOLLOW sets--the set of all tokens that could follow any reference in the call chain. We need to resync to one of those tokens. Note that FOLLOW(c)='^' and if we resync'd to that token, we'd consume until EOF. We need to sync to context-sensitive FOLLOWs for a, b, and c: {']','^'}. In this case, for input "[]", LA(1) is in this set so we would not consume anything and after printing an error rule c would return normally. It would not find the required '^' though. At this point, it gets a mismatched token error and throws an exception (since LA(1) is not in the viable following token set). The rule exception handler tries to recover, but finds the same recovery set and doesn't consume anything. Rule b exits normally returning to rule a. Now it finds the ']' (and with the successful match exits errorRecovery mode).
So, you cna see that the parser walks up call chain looking for the token that was a member of the recovery set.
Errors are not generated in errorRecovery mode.
ANTLR's error recovery mechanism is based upon original ideas:
"Algorithms + Data Structures = Programs" by Niklaus Wirth
and
"A note on error recovery in recursive descent parsers": http://portal.acm.org/citation.cfm?id=947902.947905
Later, Josef Grosch had some good ideas:
"Efficient and Comfortable Error Recovery in Recursive Descent Parsers": ftp://www.cocolab.com/products/cocktail/doca4.ps/ell.ps.zip
Like Grosch I implemented local FOLLOW sets that are combined at run-time upon error to avoid overhead during parsing.
Consume tokens until one matches the given token set
Override this method to change where error messages go
Prefix error message with the grammar name because message is always intended for the programmer because the parser built the input tree not the user.
Tree parsers parse nodes they usually have a token object as payload. Set the exception token and do the default behavior.
Given a rule number and a start token index number, return MEMO_RULE_UNKNOWN if the rule has not parsed input starting from start index. If this rule has parsed input starting from the start index before, then return where the rule stopped parsing. It returns the index of the last token matched by the rule.
For now we use a hashtable and just the slow Object-based one. Later, we can make a special one for ints and also one that tosses out data after we commit past input position i.
return how many rule/input-index pairs there are in total. TODO: this includes synpreds. :(
How should a token be displayed in an error message? The default is to display just the text, but during development you might want to have a lot of information spit out. Override in that case to use t.ToString() (which, for CommonToken, dumps everything about the token). This is better than forcing you to override a method in your token objects because you don't have to go modify your lexer so that it creates a new Java type.
Match current input symbol against ttype. Attempt single token insertion or deletion error recovery. If that fails, throw MismatchedTokenException.
To turn off single token insertion or deletion error recovery, override recoverFromMismatchedToken() and have it throw an exception. See TreeParser.recoverFromMismatchedToken(). This way any error in a rule will cause an exception and immediate exit from rule. Rule would recover by resynchronizing to the set of symbols that can follow rule ref.
Match '.' in tree parser has special meaning. Skip node or entire tree if node has children. If children, scan until corresponding UP node.
Record whether or not this rule parsed the input at this position successfully. Use a standard java hashtable for now.
Push a rule's follow set using our own hardcoded stack
Recover from an error found on the input stream. This is for NoViableAlt and mismatched symbol exceptions. If you enable single token insertion and deletion, this will usually not handle mismatched symbol exceptions but there could be a mismatched token that the match() routine could not recover from.
Not currently used
We have DOWN/UP nodes in the stream that have no line info; override. plus we want to alter the exception type. Don't try to recover from tree parser errors inline...
Report a recognition problem.
This method sets errorRecovery to indicate the parser is recovering not parsing. Once in recovery mode, no errors are generated. To get out of recovery mode, the parser must successfully match a token (after a resync). So it will go:
1. error occurs
2. enter recovery mode, report error
3. consume until token found in resynch set
4. try to resume parsing
5. next match() will reset errorRecovery mode
If you override, make sure to update syntaxErrors if you care about that.
Set the input stream
methods the downup strategy uses to do the up and down rules. to override, just define tree grammar rule topdown and turn on filter=true.
Generated using TypeDoc
For debugging and other purposes, might want the grammar name. Have ANTLR generate an implementation for this method.