StiTableCellImage Class

Initializes a new instance of the StiTableCellImage class

Occurs after the component printing.

Gets or sets a text that will be shown instead of a component name. If the text is not indicated then the name is shown.

Gets a value which indicates whether deleting of the components is allowed.

Gets or sets a value which indicates the mode of linking component location to the parent component size.

Gets or sets value, indicates that the image will save its aspect ratio.

Occurs before printing of the component.

Gets or sets the expression to fill a component bookmark.

Gets or sets the component bookmark.

Gets or sets border of the component.

Gets bottom position of a component.

Gets or sets a brush to fill a component.

Gets or sets value which indicates whether the component can or cannot break its contents on several pages.

Get or sets a type of the cell docking.

Get or sets a type of the cell content.

Occurs when user clicks on the component in the window of viewer.

Gets or sets the client area of a component.

Gets or sets a value which indicates placement of a simple component. Available values: "rt" - StiReportTitleBand "rs" - StiReportSummaryBand "ph" - StiPageHeaderBand "pf" - StiPageFooterBand "h" - StiHeaderBand "h.ap" - StiHeaderBand (OnAllPages) "f" - StiFooterBand "f.ap" - StiFooterBand (OnAllPages) "d" - StiDataBand "gh" - StiGroupHeaderBand "gf" - StiGroupFooterBand "e" - StiEmptyBand "p" - StiPage

Gets or sets a style of a component.

Gets the type of processing when printing.

Gets or sets the collection of conditions.

Gets or sets current bookmark for this component.

Gets or sets a name of the column that contains the image.

Gets or sets the default client area of a component.

Gets or sets a value indicates that this component is used as the delimiter.

Gets or sets a rectangle of the component which it fills. Docking occurs in accordance to the area of a component (Cross - components are docked by ClientRectangle).

Gets or sets a value which indicates whether the component will be docked or not.

Occurs when user double clicks on the component in the window of viewer.

Gets or sets a value which indicates will this component be available or not.

Gets or sets the path to the file that contains the image.

Gets or sets a value which indicates that the cell have fixed width.

Gets a value which indicates whether it is necessary to draw again the whole page when moving the component or changing its sizes in the designer.

Occurs when getting of the Bookmark for the component.

Occurs when it is required to get a report for the Drill-Down operation.

Occurs when getting Hyperlink for the component.

Occurs when getting image for the component.

Occurs when getting image url for the component.

Occurs when getting a Tag for a component.

Occurs when getting the ToolTip for the component.

Gets or sets special identificator which will be used for report globalization.

Gets or sets a guid of component.

Gets or sets a state of highlight.

Gets or sets the horizontal alignment of an object.

Gets or sets an expression to fill a component hyperlink.

Gets or sets hyperlink of a component.

Internal use only.

Gets or sets the image.

Gets or sets the image.

Gets or sets the image bytes that appeared as a result of the component rendering.

Gets or sets the expression to fill a component image property.

Gets or sets value which indicates how to rotate an image before output.

Gets or sets the image that appeared as a result of the component rendering.

Gets or sets the expression to fill a component image URL.

Gets or sets image URL.

Gets interaction options of this component.

Gets a value which indicates whether invalidating of the component occurs when a mouse pointer is above the component.

Gets a value which indicates that this is an automatic docking.

Gets a value indicating that this is the Cross component.

Gets a value which indicates that the report in which a component is placed is being designed.

Gets a value which indicates that all events are empty.

Gets or sets value, which indicates that the report is exporting.

Gets a value which indicates that the component has already been printed.

Gets or sets a value which indicates whether the component is rendered or not.

Gets or sets value indicates is the component selected or not.

Gets a localized name of the component category.

Gets a localized component name.

Gets or sets image margins.

Occurs when user enters the mouse into the area of the component in the window of viewer.

Occurs when user leaves the mouse out of the area of the component in the window of viewer.

Gets or sets value to multiply by it an image size.

Gets or sets a name of a component.

Gets or sets the WPF visual object that appeared as a result of the component rendering. This property accepts objects of two types: DrawingVisual and ImageSource.

Gets or sets the page on which an object is located.

Gets or sets the container in which an object is located.

Gets or sets parent bookmark for this component.

Gets or sets a value which indicates whether it is necessary to place component in toolbox or not.

Gets or sets a value which indicates whether the component is printable or not.

Gets or sets a value which indicates on what pages component will be printed.

Gets a component priority.

Gets or sets value which indicates how report engine processes duplicated images.

Gets or sets a value which indicates how many times the component is rendered.

Gets or sets the report in which the component is located.

Gets right position of a component.

Gets or sets a rectangle of a component selection.

Gets a category of services.

Gets a service name.

Gets a service type.

Gets or sets a value which indicates that this component can be shifted.

Gets or sets a value which indicates the shift mode of the component.

Gets or sets a value which indicates whether it is necessary to show quick buttons.

Gets or sets smoothing mode for drawing image.

Gets the component states manager.

Gets or sets value, indicates that this component will stretch the image till the image will get size equal in its size on the page.

Gets or sets the expression to fill a component tag.

Gets or sets tag of a component.

Gets value to sort a position in the toolbox.

Gets or sets the expression to fill a component tooltip.

Gets or sets a component tips.

Gets or sets a value which indicates that this component must use styles from parent component.

Gets or sets the vertical alignment of an object.

Increases the amount of pages on width and on height. Herewith on width or height of the page change all sizes a parent component.

Divides content of components in two parts. Returns result of dividing. If true, then component is successful divided.

Specifies that this component may be located in the specified component.

Clears all earlier saved object states.

Clears a text of all selected components.

Creates a new object that is a copy of the current instance.

Converts a value from the parent-container coordinates into coordinates of a page. The method calls the ContainerToPage method of the parent component.

Converts a point from the parent-container coordinates into coordinates of a page. The method calls the ContainerToPage method of the parent component.

Converts a rectangle from the parent-container coordinates into coordinates of a page. The method calls the ContainerToPage method of the parent component.

Converts a component out of one unit into another.

Invokes the GetBookmark event.

Docks the component and all of its subordinate components.

Docks a rectangle, relatively to the component, into the rectangle.

Determines whether the specified object is equal to the current object.

Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.

Returns the topmost Container(StiPanel or StiPage) in which the component is located. Returns null, if nothing is located.

Returns the DataBand in which the component is located. Returns null, if nothing is located.

Returns a rectangle of the component showing.

Retuns an empty rectangle to which docking is possible.

Retuns an empty rectangle to which docking is possible.

Return events collection of this component.

Returns the GroupHeaderBand in which the component is located. Returns null, if nothing is located.

Serves as the default hash function.

Returns the image from specified data column.

Returns the image from the specified path.

Returns the image being get as a result of rendering.

Returns the image from specified url.

Returns the level of the object nesting. Level 1 - page, 2 - page and etc.

Makes all necessary coversions for showing an object and returns its coordinates.

Makes all necessary conversions for the object output and returns its coordinates.

Makes all necessary conversions for the object output and returns its coordinates.

Gets a thumbnail image of the component.

Gets a thumbnail image of the component.

Gets a thumbnail image of the component.

Gets a thumbnail image in the byte aray of the component.

Gets the Type of the current instance.

Renders a component in the specified container without generation of the 'BeforePrintEvent' event and the 'AfterPrintEvent' event and without checking Conditions. The rendered component will return in 'renderedComponent' argument.

Invert selection of component.

Raises the AfterPrint event.

Raises the BeforePrint event.

Raises the Click event for this report.

Raises the DoubleClick event for this report.

Invokes all events for this components.

Raises the GetBookmark event.

Raises the GetDrillDownReport event for this report.

Raises the GetHyperlink event.

Raises the GetImageData event.

Raises the GetImageURL event.

Raises the GetTag event.

Raises the GetToolTip event.

Raises the MouseEnter event for this report.

Raises the MouseLeave event for this report.

Raises the Painted event for this component.

Raises the Painting event for this component.

Creates a shallow copy of the current Object.

Raises the AfterPrint event.

Raises the BeforePrint event.

Raises the Click event for this report.

Raises the DoubleClick event for this report.

Raises the GetBookmark event.

Raises the GetDrillDownReport event for this report.

Raises the GetHyperlink event.

Raises the GetImageData event.

Raises the GetImageURL event.

Raises the GetTag event.

Raises the GetToolTip event.

Raises the MouseEnter event for this report.

Raises the MouseLeave event for this report.

Raises the Painted event for this component.

Raises the Painting event for this component.

Packs a service.

Converts a point from coordinates of a page into the parent-container coordinates. The method calls the PageToContainer method of the parent component.

Converts a rectangle from coordinates of a page into the parent-container coordinates. The method calls the PageToContainer method of the parent component.

Paints a component.

Paints events of a component.

Paints the highlight of the component.

Paints a markers specified by a Rectangle structure. This method can be used only in win version.

Paints the selection of the component.

Specifies whether it is possible to place the component on the ColumnBand.

Prepare content for rendering.

Renders a component in the specified container with events generation.

Renders a component in the specified container with events generation. The rendered component will return in 'renderedComponent' argument.

Renders a component in the specified container without generation of the 'BeforePrintEvent' event and the 'AfterPrintEvent' event and without checking Conditions. The rendered component will return in 'renderedComponent' argument. This is backward compatibility method. Please use InternalRender method for new developed components.

Reset selection of component.

Restores the earlier saved object state.

Saves the current state of an object.

Select component.

Internal use only.

Returns an Name of the component and/or the Alias of the component.

Clear component afrer render.

Occurs after the component printing.

Occurs before printing of the component.

Occurs when user clicks on the component in the window of viewer.

Occurs when user double clicks on the component in the window of viewer.

Occurs when getting of the Bookmark for the component.

Occurs when it is required to get a report for the Drill-Down operation.

Occurs when getting Hyperlink for the component.

Occurs when getting image for the component.

Occurs when getting image url for the component.

Occurs when getting a Tag for a component.

Occurs when getting the ToolTip for the component.

Occurs when user enters the mouse into the area of the component in the window of viewer.

Occurs when user leaves the mouse out of the area of the component in the window of viewer.

Occurs after the component was painted.

Occurs before the component painting.